I have been doing my QSL's one at a time, over the years with on problem. Now I get one QSL card saying
METHOD=DIRECT Then the QSL will print correctly, on the next card How do I fix it so I do not print the first Method=Direct??? Robert G Habermehl W2KKZ Trustee W2DXA VE ARRL From [EMAIL PROTECTED] Sat Jun 3 15:39:49 2006 From: [EMAIL PROTECTED] (Ronald Stuy) Date: Sat Jun 3 22:03:46 2006 Subject: [Dx4win] incoming PACKET spots in version 7.02.15 Message-ID: <[EMAIL PROTECTED]> Hello, I noticed some strange behavior of the frequency control. I have connected 2 radio's FT847 and FT1000MP. When a packet spot is coming in the mode and band in the qso window is changing. It always change for a second to the freq. and mode of the last QSO in the DX spot Window. After this it's back again to the mode and freq. of the radio. When I start entering a QSO in the QSO Window it will stay on the freq and mode of the radio. So it is no problem when I enter a QSO, the mode and freq are right. But if I stop both radios, then the band and mode is still changing when a packet spot is coming in to the last QSO's of the DX spot Window. I thought this problem was solved in this version. After restarting DX4WIN the problem still exists. Groeten, Regards Ronald Ronald Stuy, PA3EWP (Skype: PA3EWP) member: PI4COM Contestgroep Oude Maas http://www.pi4com.nl member: LLDXT Low Land DX-pedition Team http://www.lldxt.nl
