Jari, Im about to give up.
As it seem to work with som computors and not with others, even with a clean
install I wonder if it can be depending upp on the hardware what the
instalation end up like, and thereby makes DX4Win to work or not?
One wonder, will there be a true x64 version of DX4Win soon? With Windows
Vista months away this will be and issue anyway.
If anyone has the slightest idea or anything I can try to do to solve this,
please, please let me know!.
/Anders
----- Original Message -----
From: "Jari Jussila" <[EMAIL PROTECTED]>
To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
Sent: Thursday, June 08, 2006 3:33 PM
Subject: Re: [Dx4win] Re: Re:vichw11.sys ---------------> Now after
re-install
Anders ....
I installed the DX4WIN to my (company) laptop computer. Absolutely
no problems! The programme even asked me, if it can install the vichw11.sys
to C:\windows ...etc. So that was the good news ....
But I still have the same problems with my other PC. I have copied
the vichw11.sys to almost all folders, no help. I spoke with my PC people
at the wotk, and they said that I should perhaps check he regedit.exe, but
that's a bit complicated to me.
I hope you can find the cure.
Jari, OH2BU
At 20:13 7.6.2006, you wrote:
>I have now done a coplete re-install of Win XP PRO x64. Before I installed
>any other software or created any user acounts I installed DX4Win and
>copied the file. But NO! It do not work now either. I rebooted and tried
>again. No luck. I copied the file to Dx4Win's map and also to c:\Windows,
>rebooted and tried again. No, no no! It do not work.
>
>What can I do?
>
>/Anders
>
>
>
>----- Original Message ----- From: "C?sar Rodrigues"
><[EMAIL PROTECTED]>
>To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
>Sent: Wednesday, June 07, 2006 2:22 PM
>Subject: Re: [Dx4win] Re: Re:vichw11.sys
>
>
>>I bet it will solve. This is clearly a Windows privilege issue.
>>
>>Regards,
>>
>>Cesar PY2YP
>>
>>----- Original Message ----- From: "Anders Janis SM4RNA"
>><[EMAIL PROTECTED]>
>>To: "C?sar Rodrigues" <[EMAIL PROTECTED]>; <[email protected]>
>>Sent: Tuesday, June 06, 2006 6:45 PM
>>Subject: Re: [Dx4win] Re: Re:vichw11.sys
>>
>>
>>>As I did a clean install with new partition and full format, I doubt that
>>>a re-install of Windows will be the solution.
>>>
>>>/Anders
>>>
>>>
>>>----- Original Message ----- From: "C?sar Rodrigues"
>>><[EMAIL PROTECTED]>
>>>To: "Anders Janis SM4RNA" <[EMAIL PROTECTED]>
>>>Sent: Monday, June 05, 2006 2:53 PM
>>>Subject: Re: [Dx4win] Re: Re:vichw11.sys
>>>
>>>
>>>>I used to have this kind of problem here in the office, I simply gave
>>>>up. I did try everything with the network experts here in the job with
>>>>no luck. Looks like a problem with the XP administrator privileges. I
>>>>strong suggest you to re-install the XP. If you find any other solution
>>>>please let us know.
>>>>
>>>>Fortunately enough I don't have this kind of problem at home.
>>>>
>>>>73 Cesar - PY2YP
>>>>
>>>>----- Original Message ----- From: "Anders Janis SM4RNA"
>>>><[EMAIL PROTECTED]>
>>>>To: <[email protected]>
>>>>Sent: Sunday, June 04, 2006 12:41 PM
>>>>Subject: [Dx4win] Re: Re:vichw11.sys
>>>>
>>>>
>>>>>Hi!
>>>>>
>>>>>I am logged in with administrator rights. I have installed and
>>>>>configured the whole system with my current log in.
>>>>>
>>>>>I think the PC hates me.
>>>>>
>>>>>/Anders
>>>>>----- Original Message ----- From: RonnieB
>>>>>To: [EMAIL PROTECTED]
>>>>>Cc: [email protected]
>>>>>Sent: Sunday, June 04, 2006 5:09 PM
>>>>>Subject: Re:vichw11.sys
>>>>>
>>>>>
>>>>>Hi Anders.
>>>>>
>>>>>
>>>>>You have to be in "administrator" mode to run the program. The driver
>>>>>needs to be installed for generating CW, and the program attempts to
>>>>>check for it during startup, unsuccessfully if you're not an
>>>>>administrator.
>>>>>
>>>>>
>>>>>I (and others) have requested a program change to let Dx4Win run
>>>>>without CW support if the driver's presence can't be verified, but the
>>>>>authors haven't responded.
>>>>>
>>>>>
>>>>>There are two main reasons that I think the change should be made:
>>>>>
>>>>>
>>>>> 1) The computer is more open to external attacks (hackers) in "admin"
>>>>> mode.
>>>>> 2) If you're just a user of the computer, and not able to set "admin"
>>>>> authority
>>>>> (my situation at the work QTH), you can't run the program.
>>>>>
>>>>>
>>>>>-Ron N9QQK
>>>>>
>>>>>
>>>>>>Hi!
>>>>>>
>>>>>>.Have just installed Win XP Pro x64 and DX4Win 7.02.15. When I try to
>>>>>>lanch DX4Win I get the following error message.
>>>>>>
>>>>>>Error:
>>>>>>
>>>>>>Please copy the driver file: C:\Program Files
>>>>>>(x86)\dx4w702\DRIVERS\vichw11.sys
>>>>>>To: C:\WINDOWS\system32\Drivers\vichw11.sys
>>>>>>The Appendix File has more information about this.
>>>>>>
>>>>>>I have done this and still the same happens. I have scanned the whole
>>>>>>harddrive for Appendix and have not found an similar file.
>>>>>>
>>>>>>What to do?
>>>>>>
>>>>>>de Anders SM4RNA
>>>>>>_______________________________________________
>>>>>>Dx4win mailing list
>>>>>>[email protected]
>>>>>>http://mailman.qth.net/mailman/listinfo/dx4win
>>>>>
>>>>>_______________________________________________
>>>>>Dx4win mailing list
>>>>>[email protected]
>>>>>http://mailman.qth.net/mailman/listinfo/dx4win
>>>>
>>>
>>
>
>_______________________________________________
>Dx4win mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/dx4win
