DX4Win-ers: I thought I'd pass these along so others might not redundantly send them in.
These are observed and easily reproduced in 7.02; they were present in 6.x as well. 1) Preferences/Ext Data If you use "Website callsign lookup" you must put something in both the "Callsign lookup address" field AND the "QSL manager lookup address" field. If you don't, pressing F3, Enter from the QSO window does nothing. Here's the way this is supposed to work (according to the User Guide) : If the field with focus in the QSO window is ANYTHING OTHER THAN the QSL manager field, pressing F3 followed by Enter is supposed to do a callsign lookup on the website you chose in the Preferences/Ext Data/Callsign lookup address box. If the field with focus in the QSO window IS QSL manager, pressing F3 followed by Enter is supposed to do a QSL manager lookup on the website you chose in Preferences/Ext Data/QSL manager lookup address. It doesn't work that way. In my case, I used http://www.qrz.com for the Callsign lookup and http://www.qrz.com/callsign?qsl= in the QSL manager lookup (as instructed in both the online help and the User Guide). There are two problems: No matter where the field focus is in the QSO window, pressing F3 and Enter always goes to the QSL manager lookup address. Paradox: If you only want to do a Callsign lookup, you can never do a Manager lookup because you must put http://www.qrz.com/ in BOTH the Callsign lookup box AND the QSL manager lookup box. The workaround is to put http://www.qrz.com/ in both the Callsign and QSL manager lookup boxes. If you do that, at least F3, Enter does the callsign lookup. And, while I'm whining, I asked that the F3 followed by Enter be changed to just F3. The Enter keypress shouldn't be necessary. 2. Country Window position (dual monitor setup) When you ask that DX4WIN remember window position by Preferences/Screen and using the "Leave all windows in original position" checkbox, it does not affect the Country window. No matter where you move it to, when you exit it comes back to the middle of the left-hand screen (approximately). Note:this only behaves as described on my dual monitor setup. And, while whining, the wording for the checkbox should be "Leave all windows where they are on exit". Just tryin' to help.. Chaz, W4GKF
