Has anyone installed (or is going to install) Microsoft Vista Beta 2 and try to run DX4WIN?
73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri Jun 9 18:28:00 2006 From: [EMAIL PROTECTED] (Tim) Date: Sat Jun 10 01:38:51 2006 Subject: [Dx4win] Rig blaster plus Message-ID: <[EMAIL PROTECTED]> Any luck with rig blaster plus, DX4WIN and a OMNI V? Boot up procedure works correctly... CW is turning on the digital light...not the radio... I have to use my footswitch for RTTY to transmit..... Thanks, TIM, WA5YOM From [EMAIL PROTECTED] Fri Jun 9 12:43:15 2006 From: [EMAIL PROTECTED] (Scott Neader KA9FOX) Date: Sat Jun 10 06:01:08 2006 Subject: [Dx4win] IC746 Rig Control Message-ID: <[EMAIL PROTECTED]> First, I got the RTTY working in DX4WIN with my new Microham DigiKeyer... I had to tell MMTTY to use a different device (the default device is "-1"). Works great!! I'm on a different mission now... trying to get Rig Control working between my IC746 and DX4WIN, using the built-in CI-V interface in the Microham DigiKeyer. DigiKeyer USB Router Settings: Control: COM8 IC-746 Radio Settings: CI-V Baud Rate: 4800 (although I've tried AUTO and 19200) CI-V Address: 56h CI-V Transceive ON (but have tried OFF) CI-V 731 Mode OFF (although I have tried ON) DX4WIN Software: Second Radio: Type: ICOM 746 Address: 56 Baudrate: 4800 (although I have tried 19200) COM Port: COM8 Poll Rate (ms): 5000 (have also tried 1000, same as my MP) Max Tries: 6 (default value) DTR High: YES (although have tried to turn off) RTS High: NO In the USB Router, while DX4WIN tries to see the radio, it shows "Open" 4800 8N1 with the red and green arrows blinking. But then eventually DX4WIN says "radio timeout, radio disabled" and then the USB Router shows "closed" Thanks for any pointers! - Scott KA9FOX
