DX4WIN has not. All other software has also not! Have send you yesterday a PM with some hints for a Virtual Port software. Thats the only way!
Remember: a virtual port is not a piece of hardware - its virtual! Example: A virtual soft runs on a PC, a PC has only COM1 (hardware) - virtual soft creates a COM2 and COM3(virtual). You adjust DX4WIN to COM 2 and HRD to COM 3. If now DX4WIN communicate with COM2 - virtual soft switch internal all trafic to COM1 If now HRD communicate with COM3 - virtual soft switch internal all trafic to COM1 Virtual soft double your COM 1 !! VirtualVP create up to 4 virtual ports. Hope that help. 73 Chris DL5NAM www.logsearch.de > -----Urspr?ngliche Nachricht----- > Von: "Tony Lord" <[EMAIL PROTECTED]> > Gesendet: 10.10.06 10:48:59 > An: <[email protected]> > Betreff: FW: [Dx4win] ICOM IC 756 Pro II > > Further to my posting below, I received the following reply off the ICOM > reflector: > > " I don't think a Y connector is a good ideal, but I think that HRD > and DX4WIN will support "virtual" ports. In other words, with HRD > running, it can connect to DX4WIN virtually to pass on the radio > settings to DX4WIN. I am sure there is settings for this on either > HRD web site or DZX4WIN web for getting all this to work together." > > Does any one know if DX4WIN has such settings ?? > > 73's de Tony G8DQZ > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tony > Lord > Sent: 09 October 2006 17:46 > To: [email protected] > Subject: [Dx4win] ICOM IC 756 Pro II > > > > Hi all, > > > > I have an IC 756 Pro II. Socket 7 on the reverse is the CI-V control jack > (remote). I have this connected to my computer for the logging software > (DX4WIN). I would also like to have HRD connected, but of course only one > item of software can be connected via this connecter and its respective com > port. > > > > Has any one had any experience of using two CI-V level converters (each with > its own comport assigned) connected via a Y connector?? Does this work or > can one piece of software interfere with the other when connected thus?? > > > > ICOM's CT-17 is for connecting up to 4 rigs to a PC, not the way round I > want?? > > > > Appreciate peoples advice..... > > > > > > 73's De Tony G8DQZ > > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________________________________ Viren-Scan f?r Ihren PC! Jetzt f?r jeden. Sofort, online und kostenlos. Gleich testen! http://www.pc-sicherheit.web.de/freescan/?mc=022222
