I may have spoken too soon - I noticed the pausing again last night, even with the new slower polling rate, but not as frequent. I'll keep notes during the CQWW contest this weekend.
73 - Jim AD1C --- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: > --- n4dsp <[EMAIL PROTECTED]> wrote: > > > I set mine to 5000ms as dx4win recommends. I had mine set to 500ms for some > > > strange reason. > > Mine was set at 1000 - I bumped up to 5000 and the "pausing" problem seems > gone! Thanks, John! > > 73 - Jim AD1C > > p.s. I did NOT un-install any Microsoft updates. -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri Oct 27 17:16:43 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Fri Oct 27 17:23:26 2006 Subject: [Dx4win] Help identify problem callsigns for the country file Message-ID: <[EMAIL PROTECTED]> Hi Folks, Those of us running 7.02 have better "bad /portable rejection" due to changes Paul made at my suggestion. Problem calls seem be mostly of the form: /LH /LGT (lighthouse stations - these come up as Norway) /J /JOTA (Jamboree on the Air - these come up as NO COUNTRY) I now have trouble identifying these problem calls from the spots files, since they don't affect me any more. If you are so inclined, you can help me out: To identify calls in your logbook for which DX4WIN can't determine the prefix, do this: - cancel any logbook filters - open the Logbook window - open the report editor and select only these fields: Date Callsign Prefix - right-click on the logbook window and write to (a .CSV) file - open that .CSV file in Excel (or equivalent) and sort the log by the Prefix column (make sure to "expand the selection" when Excel asks. Note that Excel has a limitation of 64K lines, so it may not read in your whole logbook. - Go to the bottom of the sorted list. Identify any QSO where the prefix field is blank. Send me the data (call, date, etc.) Note it is NORMAL for X5 and T0 (Tango-Zero) stations to have no prefix. As far as the others, you can search the callsign field for: /LH /LGT If any QSOs come up, and the Prefix field in the logbook does not match the prefix for the base callsign (i.e. AD1C/LH should come up as USA, not Norway), then let me know the call and date of those QSOs. There's no rush on this, I won't be incorporating these changes until a future release of the country files (not the upcoming release). 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri Oct 27 18:16:37 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Fri Oct 27 18:23:20 2006 Subject: [Dx4win] Re: Help identify problem callsigns for the country file Message-ID: <[EMAIL PROTECTED]> Paul KK4HD reminded me that you can sort the logbook by prefix. The calls with no prefix will at the beginning of the sorted log. --- Jim Reisert AD1C <[EMAIL PROTECTED]> wrote: > Hi Folks, > > Those of us running 7.02 have better "bad /portable rejection" due to changes > Paul made at my suggestion. > > Problem calls seem be mostly of the form: > > /LH > /LGT (lighthouse stations - these come up as Norway) > > /J > /JOTA (Jamboree on the Air - these come up as NO COUNTRY) > > I now have trouble identifying these problem calls from the spots files, > since > they don't affect me any more. > > If you are so inclined, you can help me out: > > To identify calls in your logbook for which DX4WIN can't determine the > prefix, > do this: > > - cancel any logbook filters > > - open the Logbook window > > - open the report editor and select only these fields: > > Date > Callsign > Prefix > > - right-click on the logbook window and write to (a .CSV) file > > - open that .CSV file in Excel (or equivalent) and sort the log > by the Prefix column (make sure to "expand the selection" when > Excel asks. Note that Excel has a limitation of 64K lines, > so it may not read in your whole logbook. > > - Go to the bottom of the sorted list. Identify any QSO where > the prefix field is blank. Send me the data (call, date, etc.) > Note it is NORMAL for X5 and T0 (Tango-Zero) stations to have no > prefix. > > As far as the others, you can search the callsign field for: > > /LH > /LGT > > If any QSOs come up, and the Prefix field in the logbook does not match the > prefix for the base callsign (i.e. AD1C/LH should come up as USA, not > Norway), > then let me know the call and date of those QSOs. > > There's no rush on this, I won't be incorporating these changes until a > future > release of the country files (not the upcoming release). > > 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Fri Oct 27 19:25:05 2006 From: [EMAIL PROTECTED] (Whaka Rewa) Date: Fri Oct 27 19:33:24 2006 Subject: [Dx4win] DX4WIN with Jupiter In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I am at a loss to know how to setup DX4WIN to work with my Ten Tec Jupiter. I have setup up 746PRO and 897D without problem in the past. Any help would be appreciated. (My apologise if this has been covered before.) Bryan, ZL1NI
