Hi all, sure wish there was a way to get the FT9K driver from the writelog program and add it to my DX4WIN program. 73 John EMAIL: [EMAIL PROTECTED] WEBPAGE: http://www.w9rpm.com/ AOL IM: W9RPM
----- Original Message ----- From: "Toby & Ira Stoler" <[EMAIL PROTECTED]> To: "ON4AOI" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]>; <[email protected]> Sent: Saturday, September 02, 2006 3:36 PM Subject: Re: [Dx4win] YAESU FTDX9000 and Also FT2000 cat problems > Hello Guy and everyone, > > I received my FT2000 from Texas Towers yesterday. I was their number 2 > FT2000 sold. > > I have tried using FT9K driver in DX4WIN 7.02 and it does follow the radio > band changes and successfully read frequency into qso record. It does not > follow when I click on packet spots. > > I am also using Writelog version 10.59D, also using FT9K driver. WL seems > to work properly both in reading frequency and mode from radio as well as > setting VFO A and B when the spot specifies a split frequency and only VFO > A for simplex spots. > > I am also using MicroHam Microkeyer USB interface with their version 3.1.4 > router and it is properly sensing FT2000 frequency using settings for > FT9K. > > I hope this is useful information. > > 73, > > Ira K2RD > > ON4AOI wrote: > >>John, >> >>Dx4win is supporting the FTDX9000 but it isn't working >>Like in All OTHER LOGBOOK or CONTESTPRG correct. >>OMS, PY5EG explained clearly what the problem is. >> >>"Changing bands manually on the FT9K" >>DX4WIN follows to the correct band. >>This works OK. >> >>"Sending a grabbed spot to the radio." >>The radio goes to the correct frequency on the FT9K But it goes to VFO B >>for XMIT and not to VFO A, >>independently if the station is operating split or not. >>Cmd for VFO A = FA...... and cmd for VFO B = FB...... etc >>This is done by all tested programs but the problem stays >>For all the same. Probably this is a FIRMWARE bug in the FT9K but nobody >>answers this !!! >>Maybe this is also the reason why you can't buy the FT2000 ( = same new >>CAT commands like FTDX9000D). >>There are some sold in USA but nobody knows (mailed several big dealers >>all >>over the world) when they will be available again. >> >>73 Guy ON4AOI >> >>BAND DECODER and related stuff at >> >>http://www.on4aoi.be/banddecoder.htm >> >>DX4WIN soft and related stuff at >> >>http://www.on4aoi.be/dx4win.htm >> >>DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at >> >> http://www.on4aoi.be/keyer.htm >> >>ARSWIN link and related stuff at >> >>http://www.on4aoi.be/web7.htm >> >>DXTELNET soft and related stuff at >> >>http://www.on4aoi.be/dxt.htm >> >> >> >>_______________________________________________ >>Dx4win mailing list >>[email protected] >>http://mailman.qth.net/mailman/listinfo/dx4win >> > > >
