That worked just FB OM !!! Once again, thanks guys for the help!!
The more I start using DX4WIN for award tracking, the more I find it to be an excellant investment!! Well worth the price. 73 Mark K3MSB On 12/29/07, Kostas SV1DPI <[EMAIL PROTECTED]> wrote: > You will need only the qsos confirmed by a card. > So change your preferences > File>preferences> qsos tab from card or upload to card in hand, save and > exit From [EMAIL PROTECTED] Sat Dec 29 14:18:36 2007 From: [EMAIL PROTECTED] (K5MR) Date: Sat Dec 29 14:17:50 2007 Subject: [Dx4win] DX4WIN and EZMaster interface Message-ID: <[EMAIL PROTECTED]> Is anyone using DX4WIN with the EZMaster SO2R controller? I am using an FT-1000MP and IC-765 with EZMaster ver 1.40 firmware. Both radio interfaces, CW, PTT and DVK work fine using WinTest and EZM. I am not able to get any of the radio, CW or PTT interfaces to work with DX4WIN (7.03). The EZM uses a single USB port connection between the PC and EZM box via a virtual serial port (COM 4). I set COM 4 inside DX4WIN to 19200 baud, 8 bits, no parity, 1 stop bit, and DTR=CW and RTS=PTT. I am not getting any communication from either radio and CW keying/PTT is not working. Does anyone have experience with DX4WIN and EZMaster? Thanks and 73, Steve - K5MR
