You can find the current list of changes at:

   http://dx4win.ad1c.us/tcpip.htm

Please let me know if I should make any changes or additions.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED]  Wed Jan 31 13:54:22 2007
From: [EMAIL PROTECTED] (Glenn Millar)
Date: Wed Jan 31 13:57:06 2007
Subject: [Dx4win] Band plan and Dx4win --- THANKS !!!!
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

Thanks Guys for all the replies.  To be honest with you I had been looking 
in the wrong section as I was looking in the radio setup and yet again 
you've shown me its simple when you know how.

Thanks again for taking the time

Regards Glenn


----- Original Message ----- 
From: "ON4AOI" <[EMAIL PROTECTED]>
To: "'Glenn Millar'" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Wednesday, January 31, 2007 11:09 AM
Subject: RE: [Dx4win] Band plan and Dx4win


> Glenn,
>
> Go into preferences
> Go to the QSO TAB
> Look for CW frequency Cutoff
> Select 40 M
> Change standard 7150 to 7040
> Save changes and exit
>
> Guy ON4AOI
>
>
> -----Oorspronkelijk bericht-----
> Van: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED]
> Namens Glenn Millar
> Verzonden: Wednesday, January 31, 2007 9:31 AM
> Aan: [email protected]
> Onderwerp: [Dx4win] Band plan and Dx4win
>
> Is there any way of editing the band plan that DX4win understands for 40m.
> Say station VU7LD is spotted on 7.065 I can guess its going to be an  LSB
> signal but yet when I click on the spot on the cluster with this 
> information
> the rig goes to the correct freq OK but sets up in CW instead of SSB. 
> (Yes
> I know some of you will be asking do you want DX4win to work the station 
> as
> well for me - getting too lazy)
>
>
>
> I am running an FT1000MP and suspect the answer to my query is as usual 
> dead
> easy to spot but perhaps I have overlooked it.
>
>
>
> Regards Glenn
>
>
> _______________________________________________
> Dx4win mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/dx4win
>
> 

Reply via email to