On 2/13/2008 9:45 PM, [EMAIL PROTECTED] wrote: > I am setting up my dxcc award and need some assistance. > I have already submitted 100 cards and received my dxcc > certificate. This was done before dx4win program was being used. > I have imported all my qso's into dx4win and everything is working > just fine. > How do I tell dx4win the cards that have already been submitted for dxcc, > so that they don't get mixed up with the cards that have not been > submitted.
Expand your logging window using F5 until you see the award flags at the bottom. For each QSO you submitted (use F8 to search for the call), change the appropriate award flag (DXCC mixed/band/mode) to "Checked" to match the credit(s) you received for that QSO. F10 saves the QSO. Repeat for all 100 cards. 73 - Jim AD1C -- Jim Reisert AD1C/?, <[EMAIL PROTECTED]>, http://www.ad1c.us From [EMAIL PROTECTED] Thu Feb 14 02:23:48 2008 From: [EMAIL PROTECTED] (Victor West) Date: Thu Feb 14 02:28:32 2008 Subject: [Dx4win] Announce DX with FT-2000 References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I would like to see a good radio driver for the FT-950. I volunteer to be a beta tester! de Vic, N5YY ex AE5DX ----- Original Message ----- From: "David J. Strout" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 13, 2008 9:30 PM Subject: [Dx4win] Announce DX with FT-2000 > Gents: Can we bring some pressure on DX4WIN to correct the > FT-2000 announce call out so that the xmit and QSX frequency read > correctly? For one, I have refused to assist 3 new potential purchasers > from buying DX4WIN until this is fixed. They are waiting to buy > and then I install and tutor them. I've been a faithful purchaser, but > get no satisfaction > on this very annoying item. > 73, W2YC > _______________________________________________ > Dx4win mailing list > [email protected] > http://mailman.qth.net/mailman/listinfo/dx4win >
