Hi Thor - Thanks for your note - I didn't remember that my article was on AD1C's web site.
Try this as a test. Hit F8 and search for a prefix for which you have relatively few QSOs (JT?). Then click on Labels|Set Print Flag rather than Mark for QSL. The program will ask you "Set label field in QSOs matching filter?" Click yes, and it will mark only the JT QSOs. I don't know about the 9999 limit - I just did a simulated print run with my entire log - over 100,000 QSOs - and the program said it was ready to print every one. There could be such a limit in the printing, not just in the previewing, but it isn't visible. At 07:15 AM 1/10/2008, you wrote: >I have begun the task of QSLing via the Bureau for my various operations >and different call signs. > >It is clearly not economical to send out QSL cards to all contacts, and I >have beentaking a look at the QSL Management softwary BV by DF3CB, but I >was completely unable to get it to work with my printer and I gave up. > >It is also too much work to go through hundreds of pounds of QSL cards and >mark them one by one as received. > >I was therefore pleasantly surprised to see that apparently DX4WIN >supports printing only the first QSO on a Band/Mode, ignoring subsequent >QSOs on duplicate Bands/Modes for printing. > >http://www.ad1c.us/dx4win/appnotes/nr2.htm refers. > >This would eventually reduce the QSL load greatly as only new stations or >new Bands/Modes would be printed out the next time. > >When going to Mark QSOs and printing to preview it appears that only 9999 >QSOs will be printed. > >This could well be a ?feature ?of the preview only, in that the preview >only shows the printout up to 9999 pages, but I would like to be certain >before attempting such a large printout. > >I tried to Mark QSOs only for a specific country like ?JA' but Mark QSOs >clearly dealt with the entire log only and ignored my search criteria. > >As my first batch of cards will be more than 20,000 cards - this is out of >more than 40,000 QSOs, I am wondering if there is a workaround for this? > >Thanks for any help. > >Thor,TF4M > > > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win
