Hi Thor I suggest to print first the SV qsos (hi hi) By the way tnx for the qso on 160m band and confriming this on lotw very quickly Probably you will print direct onthe cards so why you have more than 9999. When you reach at the last stage (report setup) you will choose destination (between printer and preview) and Pages(between All-Range). Voila You will select Range and tell it from 1-100. So you will print the first hundred cards After this 101-200, etc I suggest not to print more than 100 cards (from my expierence) and after every succesfull printing, clear the flags and save your file. ... and pse print first the SV cards (hi hi) 73 Kostas SV1DPI
----- Original Message ----- From: "Pete Smith" <[EMAIL PROTECTED]> To: "Thorvaldur Stefansson, TF4M" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Thursday, January 10, 2008 2:53 PM Subject: Re: [Dx4win] pre-emptive QSLing > Hi Thor - Thanks for your note - I didn't remember that my article was on > AD1C's web site. > > Try this as a test. Hit F8 and search for a prefix for which you have > relatively few QSOs (JT?). Then click on Labels|Set Print Flag rather > than Mark for QSL. The program will ask you "Set label field in QSOs > matching filter?" Click yes, and it will mark only the JT QSOs. > > I don't know about the 9999 limit - I just did a simulated print run with > my entire log - over 100,000 QSOs - and the program said it was ready to > print every one. There could be such a limit in the printing, not just in > the previewing, but it isn't visible. > > > > At 07:15 AM 1/10/2008, you wrote: > >>I have begun the task of QSLing via the Bureau for my various operations >>and different call signs. >> >>It is clearly not economical to send out QSL cards to all contacts, and I >>have beentaking a look at the QSL Management softwary BV by DF3CB, but I >>was completely unable to get it to work with my printer and I gave up. >> >>It is also too much work to go through hundreds of pounds of QSL cards and >>mark them one by one as received. >> >>I was therefore pleasantly surprised to see that apparently DX4WIN >>supports printing only the first QSO on a Band/Mode, ignoring subsequent >>QSOs on duplicate Bands/Modes for printing. >> >>http://www.ad1c.us/dx4win/appnotes/nr2.htm refers. >> >>This would eventually reduce the QSL load greatly as only new stations or >>new Bands/Modes would be printed out the next time. >> >>When going to Mark QSOs and printing to preview it appears that only 9999 >>QSOs will be printed. >> >>This could well be a ?feature ?of the preview only, in that the preview >>only shows the printout up to 9999 pages, but I would like to be certain >>before attempting such a large printout. >> >>I tried to Mark QSOs only for a specific country like ?JA' but Mark QSOs >>clearly dealt with the entire log only and ignored my search criteria. >> >>As my first batch of cards will be more than 20,000 cards - this is out of >>more than 40,000 QSOs, I am wondering if there is a workaround for this? >> >>Thanks for any help. >> >>Thor,TF4M >> >> >> >>_______________________________________________ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >
