I just encountered a problem that had not previously appeared. I'm running version 7.07.02 and can no longer have both radio control and MMTTY running at the same time. MMTTY is assigned to COM2 and radio control to COM3. I can either run MMTTY or have radio control, not both. They are connected to a two port serial card with one port assigned COM2 with an I/O range of AC00-AC07 IRQ22 and the other port is assigned COM3 with an I/O range of A800-A807 and IRQ22. Yes, the IRQ numbers are the same, but it's virtually impossible to manually change them in XP Home. When using N1MMLogger, I have no problems, but do with DX4Win. I even tried loading two of the previous versions of DX4Win but there is no difference. I am certain that this worked OK in the past. Any ideas, guys? Thanks.
John W9ILY ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
