Diving a little deeper, I think I see where the problem lies. Mode in question is JT6M. Looking at the LOTW web site FAQ, there is a listing of modes supported by LOTW. Modes are grouped into CW, PHONE, IMAGE and DATA. JT6M is not listed as one of the currently allowed modes by LOTW and I had to create a mapping JT6M->DATA in TQSL so I could upload my contact. I also had created a JT44->DATA mapping in TQSL as that mode was not listed either. So...I guess LOTW needs to update their accepted modes? I will try and delete my mappings and try uploading those JT44 and JT6M QSO's. Maybe LOTW has changed the accepted modes without updating their FAQ.
Thanks Mel Jay Hainline KA9CFD EN40om Colchester, IL -----Original Message----- From: Mel [mailto:[email protected]] Sent: Friday, September 25, 2009 19:56 To: Jay Hainline Cc: 'Jim Reisert AD1C'; [email protected] Subject: Re: [Dx4win] DX4WIN not setting LOTW upload flag Check you don't have a spurious mapping set up in TQSL Jay. Jay Hainline wrote: > Jim, I don't think you understand. I DID upload my QSO's with the > proper mode, however LOTW confirmed it as mode DATA. If LOTW matches > DATA to any digital mode, then DX4WIN should also. > > > Jay Hainline KA9CFD EN40om > Colchester, IL > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Jim Reisert AD1C > Sent: Friday, September 25, 2009 15:56 > To: Jay Hainline > Cc: [email protected] > Subject: Re: [Dx4win] DX4WIN not setting LOTW upload flag > > On Fri, Sep 25, 2009 at 8:11 AM, Jay Hainline <[email protected]> wrote: > >> I am using ver 8.02 and have ran across a bug when merging the >> confirmation file generated by LOTW to my dx4win log to set the LOTW > confirmation flag. >> Some of my VHF QSO's are logged using the various WSJT digital modes. >> On LOTW a few of these QSO's were confirmed with the mode "DATA". >> When I merge the LOTW generated adif file to the DX4WIN log, DX4WIN >> will not set the confirmation flag for these DATA QSO's since they >> are in my log as fsk441 or jt6m. >> >> I think DX4WIN should recognize DATA as a legitimate mode for any of >> the digital modes and set the confirmed flag. > > DATA is not a valid ADIF mode, Jay. See: > > http://www.adif.org/adif223.htm#Mode%20Enumeration > > I would suggest uploading those QSOs again with the correct mode. > Then the downloaded lotwreport.adi file should have the correct mode, > and the confirmations will work. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
