Question below was originally posed to the microHAM reflector, but I was advised it's an issue with DX4WIN. I'm not entirely convinced it's not operator (me) error. Anyone else have the problem listed below or know of a solution?
Larry K5RK From: [email protected] [mailto:[email protected]] On Behalf Of microHAM America, W4TV Sent: Sunday, December 06, 2009 12:40 PM To: [email protected] Subject: RE: [microHAM] DX4WIN Question This is an issue with DX4Win not with Router. Check with the author of that software to find out why it is not properly opening/closing the serial port under Windows 7. > -----Original Message----- > From: [email protected] <mailto:microHAM%40yahoogroups.com> > [mailto:[email protected] <mailto:microHAM%40yahoogroups.com> ] On Behalf Of LJBurke_WI5A > Sent: Sunday, December 06, 2009 10:57 AM > To: [email protected] <mailto:microHAM%40yahoogroups.com> > Subject: [microHAM] DX4WIN Question > > > I've been enjoying my new microKEYER II and have noted the > following inconvenience. Wonder what I am doing wrong. > > After an evening of operating I will manually select "stop > radio" from DX4WIN then turn the rig off. Same effect could > be accomplished by simply turning off the rig, but I would > get the "Radio timed out; radio interface has been disabled" > message in DX4WIN. The mKII goes off with the rig since it is > powered by it, but I make no effort to close the router software. > > Morning comes, I flip the rig on (mKII comes on with it). > When I select "start radio" from DX4WIN I get the "Radio > timed out; radio interface has been disabled" message. The > router software appears to be seeing the rig as it is > accurately displaying the frequency, but there is no way to > talk to the rig from DX4WIN. I have tried a variety of > sequences of rebooting equipment and software, but the only > thing that seems to get DX4WIN talking to the rig again is to > reboot the PC. > > I suspect I am missing something fundamental here in a > sequence of events that must take place, but would appreciate > some insight as to what it might be. > > microHAM device: microKEYER II with v 7.2.4 software > OS: Windows 7 Home Premium > Rig: Icom IC-7800 (provides power to mKII) > Logger: DX4WIN v 8.02 > > Larry K5RK > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
