Mel this combo is working for a few years now Its not new Guy
> -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens Mel > Verzonden: dinsdag 22 december 2009 2:52 > Aan: Peter Archibald > CC: [email protected] > Onderwerp: Re: [Dx4win] cw keying 8.03 > > Tried it here and it works fine. In fact I notice a major improvement. > You can now use the same COM port for radio control and CW. I use RTS > to > supply power to the interface and DTR to key the CW line. I believe > this > is new in Ver 8.03. This is going to be real handy with my laptop which > only has one COM port (which is one more than most ;-). > > Peter Archibald wrote: > > Jim: > > > > Using DX4WIN on com port. Same setup in 8.02, no problems. > > > > Peter/W4ZGR > > ______________________________________________________________ > > Dx4win mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
