I have an Icom 756ProII and have the same issue. Works fine under 8.02, locks into xmit as described in 8.03. I've got it connected via a Rigblaster Plus for keying and verified that the configuration settings were identical when I moved from 8.02 to 8.03. I don't believe that the information below described for the K3 would apply to my configuration.
On 12/22/2009 8:57 AM, ON4AOI wrote: > This is a reply from Dusty off the reflector to Paul and myself > Probably you have the same problem if you have K3 and maybe also for ft2000 > > Guy ON4AOI > > >> My radio and DX4WIN are now working properly. I will explain what I did. >> > I have a K3 transceiver and adjusted the PTT command which is defaulted to > OFF-OFF. I had it>adjusted to RTS-DTR and it worked fine with ver 7.07. > After reading some note I picked up someplace, it said to use DTR-OFF which > I tried and of course, it didn't work. I>then went into DX4WIN > -File-Preferences-Radio and checked DTR High and RTS High(which were > unchecked in my working ver 7.07). It still did not work. I then changed > my K3>back to RTS-DTR and the keyboard worked. Then I went back into > DX4WIN and unchecked DTR high and RTS high(one at a time) and with one and > then the other, the keyboard>still worked and it is still working. Paul, > that makes no sense to me at all. In other words, I am right back where I > started but now it works properly. I guess all's<well that end's well. > >> Thank you for your time. Have a very Happy Holiday Season. >> 73, Dusty - K3WC >> > >> -----Oorspronkelijk bericht----- >> Van: [email protected] [mailto:dx4win- >> [email protected]] Namens Roger D Johnson >> Verzonden: dinsdag 22 december 2009 14:23 >> Aan: [email protected] >> Onderwerp: Re: [Dx4win] 8.03 Problem >> >> Rick Murphy wrote: >> >>> On Mon, Dec 14, 2009 at 3:12 PM, Dusty Chapman<[email protected]> >>> >> wrote: >> >>> >>>> I just downloaded 8.03 to replace 7.07. I am having a small >>>> >> problem. >> >>>> When trying to use the CW keyboard, hitting any key or macro, keys >>>> >> the rig >> >>>> with a solid carrier/tone. The only way to turn it off is to shut >>>> >> down my >> >>>> K3 or go into the CW menu, hit Settings, then Tune, then Off. >>>> >> Needless to >> >>>> say I didn't have that problem with 7.07. "All" settings are the >>>> >> same. The >> >>>> only thing I did differently was to put 8.03 into C:\Amateur >>>> >> Radio\dx4w803 >> >>>> instead of C:\dx4w803. Before 7.07, all my DX4WIN versions were in >>>> >> the >> >>>> Amateur Radio\ folder, but directions said to put 7.07 in C:\. I am >>>> >> sure >> >>>> there was a reason for this. I have loaded 8.03 into C:\ and also >>>> >> it is >> >>>> still in C:\ Amateur Radio\dx4w803. Can I just copy all the files >>>> >> from C:\ >> >>>> Amateur Radio\dx4w803 into C:\dx4w803 or must I import all the stuff >>>> >> into it >> >>>> from 7.07? >>>> >>>> >>> >>> >> I also have the 8.03 keying problem. 8.02 works fine. I also notice alt >> K won't bring up >> the CW keyboard in 8.03. >> >> 73, Roger >> >> -- >> Remember the USS Liberty (AGTR-5) >> http://ussliberty.org/ >> >> ______________________________________________________________ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
