I use a COM port to control PTT with my 7700. It is the same setup I used with my older IC781. Newer Icoms like the 7700 and 7800 can switch to transmit under software control via the CI-V bus but I don't think D4W supports it yet... or if it does, I don't know how to make it work.
David M. Monfried wrote: > Searched the archives but could not find the answer to this simple(?) > problem - I'm unable to key the IC7800 using the PSK31 function in DX4WIN > 7.05.04. I am able to decode signals, but can't figure out what I'm doing > wrong on transmit. Here's the set-up: > > > > IC7800 + Navigator (in file/Preferences/Control, tried both Default Sound > Card and Cards 0 and 1 in PSK Sound Card). > > > > Presently control radio via com port 7; tried Stop Radio and using com port > 7 ( PSK31 window/ Alt+S /TX/com 7, then tried PTT and VOX). Nothing. > > > > Control SteppIr antenna via Remote jack on IC7800. > > > > Successfully use HRD with DM780 - but give up DX4WIN control of rig to HRD > when I want to operate RTTY or PSK31.that's why I'd like to get the PSK31 > function going on DX4WIN. > > > > I assume I'm missing something elementary - a cable connection or software > setting. If I have to add a PTT connection, I don't see where it would > terminate on the radio. > > > > Any help would be much appreciated. Thank you. > > > > Dave, W2PK > > > > > > > > > > > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
