Hi Kostas and Dave, Many thanks for your responses. Dave, it happened only in the middle of the usage i.e: when the programme is running. Booting up process is always going fine. I never had problems whatsoever when using the software in my older laptop which its OS was Windows XP. Tnx es 73 de Jo, YC0LOW
On Wed, Sep 15, 2010 at 9:50 PM, Dave Sharred <[email protected]> wrote: > To be clear in Jo's initial email; are you talking about start up of DX4Win > or when the program is running? > > If you are talking at start up; I have seen the same sort of behaviour on 2 > PC's (Win XP and WIN7). > > IN the past (XP, older PC, earlier DX4Win) I also concluded that the driver > was not installed correctly on a newly booted PC. > > I still see this sometimes on my new WIN 7 laptop. I will install the driver > at start up, which I think will provide the answer; later today. > > (BTW - I am using MicroHam USBII as my rig interface) > > 73 > > Dave > G3NKC > > > --- On Wed, 15/9/10, Kostas Stamatis <[email protected]> wrote: > > > From: Kostas Stamatis <[email protected]> > Subject: Re: [Dx4win] Error messages > To: "REFLECTOR dx4win" <[email protected]> > Date: Wednesday, 15 September, 2010, 15:40 > > > I also have noticed this but occasionally. I believe that usb to serial > driver is not loaded so quickly because our computer are not so fast. If you > wait for a while or open another program first, there will not be a problem. > 73 Kostas sv1dpi > > ----- Original Message ----- > From: "Jo, YC0LOW" <[email protected]> > To: <[email protected]> > Sent: Wednesday, September 15, 2010 2:19 PM > Subject: [Dx4win] Error messages > > >> When keying CW, I sometimes had consecutive two error mesages as follows: >> >> a. Could not open COM8 for keying:ie_Open - device already open. >> and then: >> b. Radio time out. Radio interface has been disabled >> >> To restore it, I must re-open the software in my notebook. I am using >> ver 8.04 with Windows 7 as the OS. >> I used a homemade interface made of two pcs of transistors 2N2222 and >> two resistors 1.2k to my Icom 746Pro with cable USB 2.0 to serial that >> has FTDI chipset. >> >> Could someone help me to explain what would be the cause, please? >> Tnx es 73 de Jo, YC0LOW >> ______________________________________________________________ >> Dx4win mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
