For those on the reflector who might be able to use the info regarding Hyperlog, I am resending the emails that address the issue. In short, the files from V4.09d can be used in a later version of Hyperlog (I have V4.13b) that does provide an ADIF output. Hope this info is useful.
John W9ILY _____ From: John Holmes [mailto:[email protected]] Sent: Saturday, September 18, 2010 5:29 PM To: 'Micheal R. Marshall' Cc: '[email protected]'; '[email protected]' Subject: RE: Fwd: Hyperlog V4.09d Hi Mike. Attached is the hyperlog.adi file that you can use to import into DX4WIN. I tried it and it works OK. When you import it, simply choose to import an ADIF file, not the Hyperlog choice down the list. You will note that a number of errors will be reported. You'll have to page through the log and fix them. Some are not a big deal, some are (like missing dates, etc). It shouldn't be hard to fix them, just a bit time consuming. I've also included two other files, a full text output of your log and a compressed report where some of the info is not included but it is easier to read. These may be helpful is identifying/correcting the errors that are reported. Hope all this helps and glad you're moving up to DX4WIN. Great program!! 73, John W9ILY _____ From: Micheal R. Marshall [mailto:[email protected]] Sent: Saturday, September 18, 2010 4:16 PM To: [email protected]; [email protected] Subject: Re: Fwd: Hyperlog V4.09d John and Arne: Here are the files that I've got. Hope these are what you need. If you need more, let me know. TNX A Million for the help! Mike, W2HE On 2010-09-18 12:26, John Holmes wrote: > Hi Arne. > I have Hyperlog 4.13b and this later version does export into ADIF format. > I'd be happy to give it a try. Perhaps I can import the log into my later > version and then do a successful export to ADIF. > I will need these files: > > Country.pbf > Hyperlog.dat > Hyperlog.ix > MASTOTL.pbf. > > 73, > John W9ILY [email protected] > > Date: Sat, 18 Sep 2010 10:25:45 -0400 > From: Mel<[email protected]> > Subject: Re: [Dx4win] Hyperlog V4.09d > To: Jim Reisert AD1C<[email protected]> > Cc: DX4WIN<[email protected]> > Message-ID:<[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > That's the problem... it doesn't, at least older versions didn't. > > Arne, if you send me a sample of the file to [email protected] I'll see if I > have any way of converting it... can't promise anything. Depends on the > format it is in. > > On 2010-09-18 09:49, Jim Reisert AD1C wrote: >> On Fri, Sep 17, 2010 at 9:15 PM,<[email protected]> wrote: >> >>> A friend is trying to import Hyperlog V4.09d into DX4WIN. What do we > need to do ? What is this dBase Conversion that must be performed? He sent > me a .dat file to look at as well. I do not have dBase. >> >> Hi Arne, >> >> Getting ADIF out of Hyperlog and into DX4WIN is the easiest path, if >> Hyperlog can generate ADIF. >> >> 73 - Jim AD1C >> > > > - > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
