Ahhhh, I guess I never used a wild card before with DX4. I must have used known callsigns in the alert box. Placing a known FULL callsign in the alert box does work. BUT we don't always know the callsign B4.
Tnx so much for your extra effort, and putting this issue to sleep, hi. 73, Bernie/WO2N.> ----- Original Message ----- From: David Kozinn To: wo2n Cc: dx4win@mailman.qth.net Sent: Thursday, October 14, 2010 9:08 AM Subject: Re: [Dx4win] Wild Card??? The help info I gave you was from 8.04, which is what I'm using. As it turns out, I have the manual from 5.01 and in the callsign alerts section it doesn't say anything about the ability to use wildcards. On 10/14/2010 8:49 AM, wo2n wrote: Tnx David, This what I had done, I think it used to work. It would flag the Alert callsigns RED needed new regardless even if worked previously, if I remember correctly. I have in alert box PJ2*,PJ4*,PJ5*,PJ7* DX Window is not responding to the 'always on alert" Tnx agn, 73 Bernie/WO2N. PS: tnx for the help file info.> I using Ver 5.3 if it matters ----- Original Message ----- From: David Kozinn To: wo2n Cc: dx4win@mailman.qth.net Sent: Thursday, October 14, 2010 8:37 AM Subject: Re: [Dx4win] Wild Card??? If you have the updated country file from AD1C they should show up flagged in the appropriate colors whenever they appear. If you had them as a callsign alert it'd show up on every spot, which I'd assume would get annoying pretty quickly. However, here's the help file info for that field: Callsign Alert If you specify a callsign in this field, DX spots will be monitored for this callsign regardless of band or mode. The spot will have the same color as if it was a new country. Multiple calls can be specified by separating the calls by a comma. In addition, you can use the '*' (asterisk) as a wild character match as the first or the last character in a callsign. For example, the string P5*,*/P5 will match any North Korea station, including a portable callsign. In addition to callsigns specified in this field, callsigns specified in the membership list using the '@' character can be treated as if they were specified here. You will also have to enable the 'Check @ callsigns' option on the Packet2 tab. On 10/14/2010 8:29 AM, wo2n wrote: Hi Anyway of setting callsign alert like PJ* to get all the PJ to come up on dx window as Red alert NEW??? Without putting every callsign in the alert box. My HELP window does not open. Tnx 73, de Bernie/WO2N.> ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html