Unfortunately i think you can not use the same port. As i remember i had this problem with a home made interface for my mark-v whre only pins 2,3 and 5 used for radio control. So i used pin4 for dtr cw and pin 7 for rts ptt. You must have separate ports in dx4win. Maybe Paul can do it easily in a future update. I don't use this inerface anymore but i believe many of us stii use something like this. 73 Kostas SV1DPI
----- Original Message ----- From: "David M. Monfried" <[email protected]> To: <[email protected]> Sent: Wednesday, January 26, 2011 7:47 PM Subject: [Dx4win] CW Keyboard > Not to answer my own question, but my uninstalling and reinstalling DX4WIN > 8.04, I am now able to see the CW keyboard. My thanks to all who replied > suggesting it was likely hidden somewhere. > > > > Now if I could only get it to work: I'm using the same comm port as > controls > the radio, have tried every possible combination of DTR and RTS lines, set > PTT delay to 5, but still cannot key the rig through the keyboard. So, > once > again, I would very much appreciate suggestions. > > > > Thanks! > > > > Dave, W2PK > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
