I am not sure if I have a DX4WIN problem, using V8.05, or an ELECRAFT K3 problem.
When in simplex/transceive the RX/TX freq of the K3 (VFO=A and VFO=B) is the same. OK, that's normal. However when I go to SPLIT operation on the K3 the frequency displayed and logged in DX4WIN is the TX (VFO=B) freq which can be from 0 to whatever KHz removed from the RX freq. Example of problem: During SPLIT operation mode RX = 14.024.00 (VFO A on K3), TX = 14029.00 (VFO B on K3). DX4WIN displays and logs 14029.00. How do I get the RX freq to be indicated and logged in DX4WIN? A friend using DX4WIN V8.04 and an ICOM IC-746PRO correctly indicates and logs the RX freq in SPLIT operation. OK, it may seem a minor point but it is more important to me to log the DX station TX freq (my RX freq) than it is to log my TX freq. From a friend who has K3 and DXLAB, both the RX and TX freq are indicated and logged. Maybe this is a feature that can be added to DX4WIN??? Arne N7KA Arne N7KA ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
