It's normal and correct. Jurisdictions that require amateurs keep a log require that the transmit frequency by logged.
On 2011-03-28 22:06, [email protected] wrote: > > > I am not sure if I have a DX4WIN problem, using V8.05, or an ELECRAFT K3 > problem. > > > > When in simplex/transceive the RX/TX freq of the K3 (VFO=A and VFO=B) is the > same. OK, that's normal. However when I go to SPLIT operation on the K3 the > frequency displayed and logged in DX4WIN is the TX (VFO=B) freq which can be > from 0 to whatever KHz removed from the RX freq. > > > > Example of problem: During SPLIT operation mode RX = 14.024.00 (VFO A on > K3), TX = 14029.00 (VFO B on K3). DX4WIN displays and logs 14029.00. > > > > How do I get the RX freq to be indicated and logged in DX4WIN? > > > > A friend using DX4WIN V8.04 and an ICOM IC-746PRO correctly indicates and > logs the RX freq in SPLIT operation. > > > > OK, it may seem a minor point but it is more important to me to log the DX > station TX freq (my RX freq) than it is to log my TX freq. > > > > > > From a friend who has K3 and DXLAB, both the RX and TX freq are indicated > and logged. Maybe this is a feature that can be added to DX4WIN??? > > > > Arne N7KA > > > > > Arne N7KA > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
