Hi everyone I have DX4win verson 8.04 installed on an ACER notebook with Windows 7. If I choose “Add real time”, F9 function on the QSO windows the Mode and Band are the same I set on Preferences – QSO - “Default for new QSO”: Band 20m and Mode CW. For now all are ok. If I click on the DX Spots window all informations are transferred ok to the QSO window and the RIG is set ok too (7.010.00 – for exemple), BUT... 2 or 3 seconds after this, the Mode, Band and Freq(KHs) are change on QSO window to CW, 15m and 21.026.00 and I can not change it to the right Mode or Band because the filds are disable. If I change the Freq (KHz) to the 7.010.00 shows on the RIG display, it change again to te same 21.026.00?
There is a way to set the packt connection to auto start when Dx4win goes on? I have set the filed Message Handshake with this: “http://www.dxsummit.fi/text/dx25.html|1” ... include the “”. All the time I need to click on “Connect” on the packt window. I have installed and unistalled HRD, MIXW and CWSKIMMER. Im not shure if this have any interference on DX4WIN installation, but I unistalled and reinstalled DX4 again but the problem persist.. I will appreciate any suggestions and comments, please. Thanks for reading 73 from PT2CC Mac ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
