Thanks for all the advice. I'm still having difficulties. I no long have the error that the rig doesn't support the frequency but when I double click on a spot the radio makes a short blip and doesn't change frequencies. Still sorting that out.
Just to be sure I launch my old logging software and setup the TS480. It connected and I can set frequency TX and such. So there must still be something I'm not setting correctly with DX4WIN. DX4WIN is able to read band and mode information from the rig but going the other way there is an issue. Any ideas? AD6ZJ, Loren --- On Mon, 5/23/11, ON4AOI <[email protected]> wrote: From: ON4AOI <[email protected]> Subject: RE: [Dx4win] TS-480 best choice to set radio interface To: [email protected] Date: Monday, May 23, 2011, 9:15 PM Here it is > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens Loren Hunt > Verzonden: dinsdag 24 mei 2011 5:31 > Aan: [email protected] > Onderwerp: [Dx4win] TS-480 best choice to set radio interface > > I have a TS-480SAT and am just getting it setup as my second rig on > DX4WIN. > > I had it set as a TS870 and it was working. I guess the TS870 doesn't > have 6M since when I try to click on a spot it says bad frequency for > radio. Now down in the QSO entry field it happily displays the correct > 6M frequency. Is there a better radio to set it as? > > Thanks, > AD6ZJ > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
