TS2000 did it. For some reason the TS480 file I was provided didn't work. I will compare files this weekend if the WPX activity is low... All working fine now.
73 AD6ZJ, Loren --- On Wed, 5/25/11, Kostas Stamatis <[email protected]> wrote: From: Kostas Stamatis <[email protected]> Subject: Re: [Dx4win] TS-480 best choice to set radio interface To: "REFLECTOR dx4win" <[email protected]> Cc: [email protected] Date: Wednesday, May 25, 2011, 3:49 AM I have cat control for my ts480 via internet (remoterig) but must be the same. I have kenwood 2000 as radio Baud rate is 9600 address 00 poll rate 500 max tries 2 dtr and rts are high (checked) 73 Kostas sv1dpi ----- Original Message ----- From: "Loren Hunt" <[email protected]> To: <[email protected]> Sent: Wednesday, May 25, 2011 7:45 AM Subject: Re: [Dx4win] TS-480 best choice to set radio interface > Thanks for all the advice. I'm still having difficulties. I no long have the > error that the rig doesn't support the frequency but when I double click on a > spot the radio makes a short blip and doesn't change frequencies. Still > sorting that out. > > Just to be sure I launch my old logging software and setup the TS480. It > connected and I can set frequency TX and such. So there must still be > something I'm not setting correctly with DX4WIN. > > DX4WIN is able to read band and mode information from the rig but going the > other way there is an issue. > > Any ideas? > > AD6ZJ, Loren > > > --- On Mon, 5/23/11, ON4AOI <[email protected]> wrote: > > From: ON4AOI <[email protected]> > Subject: RE: [Dx4win] TS-480 best choice to set radio interface > To: [email protected] > Date: Monday, May 23, 2011, 9:15 PM > > Here it is > >> -----Oorspronkelijk bericht----- >> Van: [email protected] [mailto:dx4win- >> [email protected]] Namens Loren Hunt >> Verzonden: dinsdag 24 mei 2011 5:31 >> Aan: [email protected] >> Onderwerp: [Dx4win] TS-480 best choice to set radio interface >> >> I have a TS-480SAT and am just getting it setup as my second rig on >> DX4WIN. >> >> I had it set as a TS870 and it was working. I guess the TS870 doesn't >> have 6M since when I try to click on a spot it says bad frequency for >> radio. Now down in the QSO entry field it happily displays the correct >> 6M frequency. Is there a better radio to set it as? >> >> Thanks, >> AD6ZJ >> ______________________________________________________________ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
