Larry the rotor tab is not needed. I have not open this window at all. When the logging field be populated you are ready to press f11 and the interface will do the rest. Forget the rotor tab. Theoritically, you need to use it if you need to go in a specific direction. Usually when i want to rotate the antenna to USA for example i write W1 in the call and press f11. I never use it.... Hope this helps 73 Kostas sv1dpi
----- Original Message ----- From: "Larry Emery" <[email protected]> To: "DX4Win" <[email protected]> Sent: Monday, September 26, 2011 10:41 PM Subject: Re: [Dx4win] Ver 8.05 and Green Heron rotor controller > > > Maybe I can explain this a bit clearer. > > When I click on a spot in the Packet field of DX4Win Ver 8.05 it populates > the logging field with CALL, MODE, BAND and also the Beam Heading of the > station automatically. HOWEVER, nothing happens at all in the DX4Win > ROTOR TAB section where the Band Info and Beam Headings stay at the > defaults of 160 meters DISABLED and 0 degrees. > I have enabled the Bands of 40-6 meters to be rotor controlled (set to > NORMAL in the Window) in the ROTOR Tab section of DX4Win. I have set the > port to the directly connected port of Com2 and I set the port speed to > 4800 8-N-1 per suggestion from Green Heron. > > I can manually plug in beam heading info or change the Band to an enabled > rotor band in the ROTOR Tab section and manually cause the rotor to turn > ok but shouldnt DX4Win populate the fields from the spot I clicked on? > > Maybe thats a bit better explanation. > > Thanks for any help... maybe someone can at least verify that the ROTOR > Tab does get populated from the spot window when clicking on a specific > station. > > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
