Guy and Jim....and Paul (if you are listening)
For the FT3K, this would probably work....I've been trying to get Paul's
attention since before he moved to incorporate that in the DX4WIN code...
RC; -Clear Clarifier
MD00; -Set Mode VFO A
AB; - Let A =B
FT1; FR0; -Set Split
Set FA; - Set A frequency
Set FB; - Set B frequency
So even if you can't set VFO B's mode, set A mode first....then let
A=B...what ever was in the A mode goes into the B mode...then set up
your split...
This 'should' work....(famous last words!)...
73/ Regards....
Lou N2TU
On 4/8/2013 9:54 AM, Jim Reisert AD1C wrote:
On Sun, Apr 7, 2013 at 10:31 PM, ON4AOI <[email protected]> wrote:
There can´t be any support for the FT3000 rig file
Not from me or Paul or anyone else.
YAESU left OUT the cat commands for VFO-B and related Mode
So as long there are no commands in the ft3000 firmware
It is impossible
So why can't there be a driver that treats the radio like it only has
one VFO? The ability to read the current VFO and assume simplex
operation is better than nothing, right?
--
Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
