Hello Lorenzo, In the latest version DX4WIN 8.05 in preferences/radios there are 6 different configurations for IC7800 models. I do not know this radio so you should chose the model you have. If you do not find these models in your preferences, then you should run DX4WIN updater by Jim AD1C http://dx4win.ad1c.us/
You should chose timing of about 500mS, it should be OK. I do not know why it jumps to the sub-VFO. If it doesn't work afdter trying different IC7800 models, you should send a question to DX4WIN reflector, somebody will surely have a response. Best 73, Radi F6GNZ Le Jeudi 20 février 2014 15h22, IK1MDF Lorenzo Tabaracci <[email protected]> a écrit : HI Radi! > > >I got a problem with my IC-7800 >The CAT (CI-V) is going to control the radio perfectly, but the POLLING on >the PREFERENCE-|>RADIO, is rated at 5000 millisecond. >It means that the radio VFO jump to SUB VFO every 5 seconds. Is is very no >comfortable . >I changed rate to 0 (zero), is not working cause the jump is every 1 second. >Any suggestion to avoid this issue? or remove it? > > >Any new software has been released from DX4WIN in order to control ic-7800 >v.3.0 released in nov.2013? >thanks > > >73 > > >IK1MDF Lorenzo Tabaracci >[email protected] >www.doctormuscle.com >Diet & Fitness >viale 20 settembre 191 >Carrara >0585-856477 >https://www.facebook.com/lorenzo.l.tabaracci > > > > > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
