I did figure out how to modify ON4AOI's rig file to set to filter 1 by
default. If anyone's interested in a copy of the file let me know, it's
a pretty minor change.
Still looking for answers to #1 & #3.
On 3/5/2016 11:16 PM, David Kozinn, K2DBK wrote:
After the smoke escaped from my trusty Icom 756 Pro II, I bit the
bullet and upgraded to an Icom 7600. For the 756, I had one COM port
configured for CI-V radio control through a CT-17 interface, and a
second COM port set up for CW keying using a Rigblaster.
With the USB interface, I've already got CI-V set up via the virtual
COM port, and I've got the audio coming into the computer via the USB
audio port. (The audio out is there as well, I've got that working
already with the voice keyer in N1MM+ for contesting.)
I tried searching the list archives and didn't have a lot of luck, and
before I re-invent the wheel, I was hoping that the list might help me
out with a couple of question:
1) Is it possible to use the USB COM port to do CW keying, or will I
need to continue to use the Rigblaster for that?
2) Using ON4AOI's ICOM 7600_250Hz I see that it goes to filter 2 when
clicking on a spot to tune either for CW or SSB, and using 7600_500Hz
it uses filter 3. Before I dig deep into the manuals, does anyone have
a version of the rig file for this radio that will use Filter 1 for
tuning? For that matter, are there any newer versions that might
provide additional capabilities? (Not sure what those might be, but
figured I'd ask.)
3) For RTTY, is it possible to do FSK using just the USB COM port, or
does that require an external keyer? (I guess this is more of an MMTTY
question.) If not, what are the recommended settings to use AFSK? On
my old rig, I'd used LSB and that worked, but I was wondering if I
could take advantage of FSK for this one.
Thanks in advance!
--
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html