David, regarding #1 and #3. My understanding is that the COM port used for radio (frequency) control must be used ONLY for radio control. You will need a second COM port to do CW keying, PTT and FSK. That port can be used for all three.
Surely someone must make a one COM Port device that does the latter. 73 - Jim AD1C On Sat, Mar 5, 2016 at 9:16 PM, David Kozinn, K2DBK <[email protected]> wrote: > After the smoke escaped from my trusty Icom 756 Pro II, I bit the bullet and > upgraded to an Icom 7600. For the 756, I had one COM port configured for > CI-V radio control through a CT-17 interface, and a second COM port set up > for CW keying using a Rigblaster. > > With the USB interface, I've already got CI-V set up via the virtual COM > port, and I've got the audio coming into the computer via the USB audio > port. (The audio out is there as well, I've got that working already with > the voice keyer in N1MM+ for contesting.) > > I tried searching the list archives and didn't have a lot of luck, and > before I re-invent the wheel, I was hoping that the list might help me out > with a couple of question: > > 1) Is it possible to use the USB COM port to do CW keying, or will I need to > continue to use the Rigblaster for that? > 2) Using ON4AOI's ICOM 7600_250Hz I see that it goes to filter 2 when > clicking on a spot to tune either for CW or SSB, and using 7600_500Hz it > uses filter 3. Before I dig deep into the manuals, does anyone have a > version of the rig file for this radio that will use Filter 1 for tuning? > For that matter, are there any newer versions that might provide additional > capabilities? (Not sure what those might be, but figured I'd ask.) > 3) For RTTY, is it possible to do FSK using just the USB COM port, or does > that require an external keyer? (I guess this is more of an MMTTY question.) > If not, what are the recommended settings to use AFSK? On my old rig, I'd > used LSB and that worked, but I was wondering if I could take advantage of > FSK for this one. > > Thanks in advance! > > -- > 73, > David, K2DBK > http://k2dbk.blogspot.com > http://k2dbk.com > twitter: @k2dbk > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
