Some time ago I was kicking my head how to listen permanently to DX-ped's frequency, while being able to select any QSX TX frequency by click on the Skimmer, even with QSX going beyond the +12kHz Skimmer's range. And just found a solution which I wish to share with anybody interested:
I kept SDR RX controlled by DX4WIN and Skimmer via RCP1 and RCP2 of DDUtil, but instead of controlling 1000MP from the "slave radio" port of DDUtil, I have installed the DXLab's Commander and W3OA's Skimmer-to-Commander. I programmed Commander to control the FT1000MP via CAT1 port of the microHAM Router, and connected Skimmer-to Commander to Skimmer's Telnet Localport 701 (which was programmed in Skimmer's Telnet Tab, where also the "allow skimmer commands" was checked). Now, in Telnet-to-Commander window, I can select whether the click on Skimmer's frequency sets vfoA or vfoB of the 1000MP, so I can now permanently listen DX-ped frequency on Main RX vfoA and transmit on any QSX frequency selected on Skimmer via vfoB of the 1000MP ! The Commander and StC can be then left hidden on the Taskbar! Hope this may be useful for others. Best 73, Radi F6GNZ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html