Cort, I use WSJT-X for JT65. It is also available as a free download. I setup both WSJT-X and DX4WIN to run off of the same com port. But I do not run them at the same time. When I want to work JT65, I click on Radio in DX4WIN and click on Stop Radio, but I keep DX4WIN open. This disconnects DX4WIN from the radio and opens up the com port.
I then open WSJT-X and it automatically connects to the radio. When I am finished making a JT65 contact, the QSO is saved to the wsjt.log file. I then import the log file into DX4WIN. Just go to File, Import/Export, make sure ADIF is selected at the top, click on Import, go find the WSJT file in your directory, double click on it, then when the window for Options for Duplicates pops up, select Ignore Duplicate QSO. This will ensure that you only import any new JT65 QSOs into your DX4WIN log. Since the signal reports from WSJT-X incorrectly go into the Notes for this Call field, I then cut and paste to move the signal report information from that field to the Notes for this QSO field. When I am done working JT65, I close WSJT-X -- which frees up the com port. I then click on Radio in DX4WIN and Start Radio to connect the radio back to DX4WIN. Again, not elegant but effective. BTW, it is fun to work weak signal JT65 on 6m as well as the other HF bands. So you should give it a try. It would be great if Paul would someday start enhancing DX4WIN again. I am sure many of us would like to see an automatic interface between WSJT-X and DX4WIN like there is for MMTTY. We also need DX4WIN to support JT9 as a mode. I might also add that an automatic interface for Fldigi would be great for the many other digital modes currently available. But Paul has been strangely inactive and incommunicado for five or six years now. For the time being, this is a workaround that is cumbersome but pretty foolproof. Good luck. 73, Dave, N4QS -----Original Message----- From: DX4WIN [mailto:[email protected]] On Behalf Of Courtney Judd Sent: Wednesday, August 10, 2016 3:14 PM To: ACG Cc: SECC; [email protected] Subject: [Dx4win] JT65A well, I have been noticing that a lot of good dx is being spotted on jt65 up around 50276 or so. Don't know anything about this but thought maybe it might be something worth while to look into. So, I down loaded WSJT and have it installed but looks to be very confusing to be sure. So any help on getting me started would be appreciated. I also down loaded the instructions and I can tell this is going to take some time and effort to get it all playing correctly. I use DX4WIN for my general logging so maybe I would have to have both programs open at the same time? Thanks, Cort K4WI ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
