Hi Jim, Thanks for the answer! DX4Win version, as indicated in my previous e-mail, is 8.05. When I spin the dial on the radio the frequency in the QSO window do NOT change , it maintains 18.165,93 MHz. When I click in one spot radio goes to that frequency, in QSO window momentarily freq is the same as spot but after that (less than one second) goes to 18.165,93 MHz...what can be wrong? Should I re-install the program? Appreciate your help! Thanks de Luis, CT4NH
Em 16/06/2017 17:31, "Jim Reisert AD1C" <jjreis...@alum.mit.edu> escreveu: > Hi Luis, > > You did not say which version of DX4WIN you are using. > > If you are in real-time add mode (F9) and using DX4WIN 8.0x, does the > Frequency field in the QSO window change when you spin the dial on the > radio? > > > On Fri, Jun 16, 2017 at 5:17 AM, Luis Teixeira <xx9...@gmail.com> wrote: > > I'm using one Yaesu FT1000 MP Mark V connected to DX4WIn V 8.05. > > When I select one spot/station/frequency from cluster , radio goes to > > frequency but ALWAYS on 17 m SSB showing exact frequency in Freq (MHz), > no > > matter what band the spot is. > > What's happening? In Set-up parameters I have as Default 20 m SSB. > > Thanks for your help. > > Best 73 de Luis, CT4NH in behalf of CT1EEQ > > ______________________________________________________________ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
