Just tap F9... Should take DX4WIN to the radio freq and it's ready for input..
or the long way: Tap QSO / Add Real Time Then spin the dial..... Art W6KY ..................................................................................................... From: Luis Teixeira <xx9...@gmail.com> To: DX4WIN Reflector <dx4win@mailman.qth.net> Sent: Friday, June 16, 2017 4:18 AM Subject: [Dx4win] Frequency main window (By default) I'm using one Yaesu FT1000 MP Mark V connected to DX4WIn V 8.05. When I select one spot/station/frequency from cluster , radio goes to frequency but ALWAYS on 17 m SSB showing exact frequency in Freq (MHz), no matter what band the spot is. What's happening? In Set-up parameters I have as Default 20 m SSB. Thanks for your help. Best 73 de Luis, CT4NH in behalf of CT1EEQ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html