On Mon, Oct 30, 2017 at 12:13 PM, Jim Reisert AD1C wrote:
> I find it easier to just do all my FT8 work in WSJT-X and periodically
> import the ADIF file into DX4WIN. I know that some people would like
> to see things more integrated.
Just to clarify...
When I import my WSJT-X ADIF file (log), and DX4WIN prompts for
"Options for duplicate QSOs", I choose "Imported QSO is ignored."
This means that any FT8 QSOs I have already imported into DX4WIN from
that log will be ignored - only the new ones will be imported.
Two improvements were made for DX4WIN 9.01:
1. DX4WIN 9.01 remembers the duplicate QSO selection for the next import.
2. DX4WIN 9.01 has an 'X' in the upper-right corner of the
Import/Export filters window,
which makes it easier to exit than using File | Exit (one click
instead of two).
Also, if DX4WIN has trouble finding your WSJT-X log, by default it is
located in this directory:
%localappdata%\WSJT-X
I typically type in the %localappdata% part then double-click on the
WSJT-X directory icon when it appears.
DX4WIN will remember the last import location, so if the last thing
you did was import a WSJT-X log, you should already be in the correct
directory to import it again with new QSOs.
73 - Jim AD1C
--
Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
Message delivered to [email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
