Hi Mark, Long time no see. Hope all is well. I don't know of a way to have two programs control the same rig as the rig only has one port. Unless you can configure the CI-V for one port and the serial for another?
My Work around is Start WSJT-X first, as that is sensitive and will complain as you have seen. Next open DX4WIN, let it inform you your port is not available, then click through the next 3 dialogue boxes. DX4WIN will open but Without Rig Control. Hope this helps. 73, Wes, W3SE / ZL3TE > On December 16, 2018 at 12:32 PM Mark Weiss via DX4WIN > <[email protected]> wrote: > > > I've used DX4WIN for many years. It controls my IC-7800 perfectly, as > expected. > > Now I'd like to also be able to control my transceiver by WSJT-X, as well. > > The problem is that they both fight for control of the rig. DX4WIN usually > wins and WSJT-X presents me with an error message. > > Does anyone have a simple way to enable both programs to control the rig > concurrently? > > Tnx & 73, > > Mark, K6FG > ______________________________________________________________ > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
