On 2018-12-16 8:16 AM, Ernie wrote:> Mark,
>
I have been using LP-Bridge to make all of the radio control stuff
play nice with my Yaesu for quite a while. Unfortunately it doesn't
list Icom as being supported, so probably not any help for you. If
DX4WIN would work with OmniRig, we would have another solution.
Another alternative to LP-Bridge is Win4K3Suite (Elecraft K3, K3S, KX2,
KX3), Win4Yaesu (Yaesu FT-991, FT-2000, FTdx1200, 3000, 5000, 9000)
and Win4Icom.
Win4K3Suite - https://va2fsq.com/
Win4Yaesu - https://yaesu.va2fsq.com//
Win4Icom - https://icom.va2fsq.com/
73,
... Joe, W4TV
On 2018-12-16 8:16 AM, Ernie wrote:
Mark,
I have been using LP-Bridge to make all of the radio control stuff play
nice with my Yaesu for quite a while. Unfortunately it doesn't list Icom
as being supported, so probably not any help for you. If DX4WIN would
work with OmniRig, we would have another solution.
Another alternative for you would be to look into some of the com port
splitting software to allow two different programs access to one com port.
For others who have Yaesu, Kenwood, Elecraft:
It was a little frustrating to get LP-Bridge and all of the programs to
play together on my Yaesu FT-950, but in the end I have DX4WIN, WSJT-X,
N1MM, and HDSDR all playing together getting CAT info and controlling
the rig.
Now all of my programs know where the rig is parked and can control it.
http://www.telepostinc.com/LPB2.html
I leave LP-Bridge running all of the time. When operating, I turn on the
rig and start the needed programs.
Ernie W8EH
On 12/15/2018 6:32 PM, Mark Weiss via DX4WIN wrote:
I've used DX4WIN for many years. It controls my IC-7800 perfectly, as
expected.
Now I'd like to also be able to control my transceiver by WSJT-X, as
well.
The problem is that they both fight for control of the rig. DX4WIN
usually
wins and WSJT-X presents me with an error message.
Does anyone have a simple way to enable both programs to control the rig
concurrently?
Tnx & 73,
Mark, K6FG
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
Message delivered to [email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
