Dave, In Windows Device Manager -> Ports (COM & LPT) you associate a Legacy LPT Port Number (LPT1, LPT2, or LPT3) with your PCIe LPT port (Port Settings tab for that port). While N1MM+ uses the port address from the Resources tab, DX4win uses the Legacy Port Number (LPT1, LPT2, or LPT3) to identify the LPT port for radio 1/2 signal (Parameters -> CW). 73, ... Joe, W4TV On 2018-12-17 10:26 PM, N4QS, Dave Perry wrote:
Alan, I did have to install the lptdriver as you suggested, but I also had to reset the LPT port address in N1MM+ to match the address for the new PCIe card. The DXD works fine now in N1MM, but I can't see a way to change the address in DX4WIN. I have emailed Paul. Thanks for the assist. 73, Dave - N4QS -----Original Message----- From: Alan Walters <[email protected]> Sent: Sunday, December 16, 2018 3:18 PM To: [email protected]; [email protected] Subject: RE: [Dx4win] Expert mode and DX Doubler Dave, I too am using my DX Doubler with 9.0.4 with Win7. I wonder if you have installed the lptdriver? Assuming you installed DX4W directly in C: drive, you will find this at C:/dx4w/drivers/lptdriver. Al, K5NOF -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Sunday, December 16, 2018 12:51 PM To: [email protected] Subject: [Dx4win] Expert mode and DX Doubler I am trying to reinstall my legacy DX Doubler SO2R box with DX4WIN ver 9.0.4. It used to work great under version 8.5. When I go to Preferences, Control tab, I cannot change the Type or LPT1 port under Band Decoder. With version 9.04, the type is grayed out as None under Band decoder. As I recall, you used to have to go into the Personal tab to turn on expert mode to change this, but that is no longer available. Is Top Ten Devices using a LPT port still supported in Version 9? And can anyone tell me what happened to Expert Mode? Thanks, Dave, N4QS
______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
