You could also decide only to whose that have sent eQSL to you. If so you do 

Logon to eQSL and choose inbox
In the bottom of the page find "download the entire InBox" and click on download
In the next windows RIGHT click on the ADI file and "Safe link as" (I am on a 
Danish browser, but I guess this is the English menu)
Safe the file where you can find it again

Now open DX4WIN (take a backup of your DX4WIN log file before you continue)
Open your log and choose eQSL -> confirm eQSL using ADIF file
Find your file from above and choose it.

Now press F8 and type Y in the cfm field right to the eQSL date field. Press 
Go to eQSL -> Set eQSL upload flag and press YES
Go to eQSL -> Export to eQSL and press YES to use the filter
Save this file and upload it to eQSL

If you want to make your inbox in eQSL smaller, you can do this (also if you 
upload the entire log):

Then go back to eQSL and choose InBox. Here you can click on the numbers right 
to the lines e.g. 10M (or the total in the bottom)
Now you can see all the QSOs in your inbox from others. Go to the bottom and 
choose "check all" -> "move checked eQSL to archive" 
eQSL will now move all QSLs that match - like LoTW but that is in the 

You can only see the inbox with QSLs if the number is below 1.000. If all 
numbers are > 1000, you have to set some filter in the bottom of the inbox.

73 Joe, OZ0J 

-----Oprindelig meddelelse-----
Fra: <> På vegne 
af Kostas SV1DPI
Sendt: 3. juni 2020 19:42
Emne: Re: [Dx4win] "e-QSL --> DX4WIN"

I suggest to upload the entire log.

You need to be sure that every QSO has eQSL=Y

To do this:

In QSO window: eQSL>Clear eqsl upload date

and then eQSL>Set eqsl upload flag

This will make all the QSOs to be ready for uploading

If you want to upload only a part, you need to make a search between dates:

Be sure that in file>preferences>QSO the QSO Date=Range

Then fit F8 and write the 2 dates (start and end)

and then the above procedure.

Then eQSL>Export to eqsl. Name the file and upload it to eqsl.

You will have been asked if you want to clear flags, etc.

Answer yes... (this will write the upload to eqsl date in you log and will set 
the eqsl flag to N.

73 Kostas SV1DPI

Στις 3/6/2020 14:56, ο Luc έγραψε:
> Hi.
> Greetings to all.
> I have just registered in e-QSL and I would like to know, how the e-QSL log
> is imported to DX4WIN, I suppose that the first time it will be necessary
> to import the entire ADIF file, but in successive steps how is the
> procedure?
> Is there a way to do it, so that it only loads the last ones and not the
> whole file?
> Regards.
DX4WIN mailing list

This list hosted by:
Please help support this email list:

DX4WIN mailing list

This list hosted by:
Please help support this email list:

Reply via email to