OK, I suspect it's because you have the import settings in dx4win set to accept dx4win values when there are differences. Yes, let's see what Jim or Paul have to say.
-- 73, Mike Cizek W0VTT -----Original Message----- From: Paul F6EXV [mailto:[email protected]] Sent: Monday, October 26, 2020 08:09 To: Mike Cizek W0VTT Subject: Re: [Dx4win] ADIF IMPORT Attached is the screen that I get upon completion of the import. As you can read, it says no errors, so this is probably why we cannot find it with the word import in the note field (either one) I wouild expect to be able to find out which zone corrections were changed... This end of import message does not state if and where this can be found. Maybe it is not even created... The correction is made, and I have no choice to cancel it, should it be the case. Maybe AD1C can tell us... 73 Paul Le 26/10/2020 à 12:45, Mike Cizek W0VTT a écrit : > My errors appear in this format: > Import:{Grid=EN32xe} > The brackets are around the error, not the word import. It may also depend > on how you set the import filter and error reporting in dx4win: > File > Preferences > Import > > > -- > 73, > Mike Cizek W0VTT > > -----Original Message----- > From: Paul F6EXV [mailto:[email protected]] > Sent: Monday, October 26, 2020 06:34 > To: Mike Cizek W0VTT > Subject: Re: [Dx4win] ADIF IMPORT > > Mike > This time, its a "no" ! I still appreciate your taking the time. > I have searched bith fields for {import and did not find any QSO reteurned. > I have also searched the field with the expression CQWW SSB 2020 {import > , and still nothing > I have also tried with a ? , same negative result. > Maybe the file of QSOs with errors is a separate one, but the little > message does not say where to find these info. > AD1C, can you help please ?? > > 73 > Paul F6EXV > > Le 26/10/2020 à 12:10, Mike Cizek W0VTT a écrit : >> Look for {import} errors in the Notes for this QSO field (I think that's > how >> it's formatted) >> >> >> -- >> 73, >> Mike Cizek W0VTT >> >> -----Original Message----- >> From: Paul F6EXV [mailto:[email protected]] >> Sent: Monday, October 26, 2020 06:07 >> To: Mike Cizek W0VTT >> Subject: Re: [Dx4win] ADIF IMPORT >> >> Hi Mike >> Yesssss, that did it ! Thanks a lot ! >> Now, at the end of the import prtocess, there is a screen giving the >> "result" of the import. >> It says there are zone exceptions. >> Where and how do I fing the QSOs concerned ? >> 73 >> Paul F6EXV >> >> Le 26/10/2020 à 11:51, Mike Cizek W0VTT a écrit : >>> Hello Paul, >>> >>> Try running the adif through AD1C's adif to dx4win utility: >>> http://dx4win.ad1c.us/adif2dxq/index.html >>> >>> >>> -- >>> 73, >>> Mike Cizek W0VTT >>> -----Original Message----- >>> From: [email protected] >> [mailto:[email protected]] >>> On Behalf Of Paul F6EXV >>> Sent: Monday, October 26, 2020 04:18 >>> To: DX4WIN Refelector >>> Subject: [Dx4win] ADIF IMPORT >>> >>> Hi all >>> I have used DXLog to log contest QSOs over the weekend. >>> In order to get these QSOs in to the log, I export DXLog to adif, and >>> re-import into DX4Win, which I think is the correct procedure. >>> The DXLofg adif file has "CQ WW SSB" info as a "comment" field, and when >>> I import it, it re appears under the "notes for the call" field. >>> >>> What must I replace "NOTES" in the adif file by, in order to get this >>> note in the "note for this QSO field" ? >>> Thanks + 73 >>> Paul F6EXV >>> > -- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
