Do you have RTS set High and DTS set Low? John K9EL
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of Andy Hewitt via DX4WIN Sent: Tuesday, October 28, 2025 6:09 AM To: [email protected] Subject: [Dx4win] DX4win inerface with TS890S Hi I have been having PC problems which have caused me pain and suffering! In particular with DX4Win. I have gradually worked through them and am more or less there now. The PC talks to the rig and vice versa, psk rotator is working, the linear is working, But now I have a key down signal from DX4Win all the time, no matter what mode I select. This is new as It was not there before I rebooted the PC yesterday. It stops if I stop the radio CAT control from DX4Win. I can only assume that before the reboot I changed something without intending to. The cw paddle works fine without the CAT control, but not when I restart RADIO. Any ideas chaps? 73 Andy G3SVD ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
