Entire USB dedicated????? Connect an eight or four port USB hub to one of the computer's USB ports. If the usb device is designed correctly it's a don't care......Kill Serial Ports....Time has come for them to fade away into the archives.....
Ron.......... NU1U -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Sent: Thursday, February 07, 2002 20:46 To: FireBrick; DXBase List Subject: Re: [DXBase] Rotators and DXbase Bill, Maybe I'm being dumb about this, but is anyone really gonna tie up a USB port just to turn a rotator? I would think a person would want a USB to Serial hub and then only have to use one serial port off the USB and have the others available. I can't see an entire USB dedicated to just a rotor. Jack ----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: "DXBase List" <[email protected]> Sent: Thursday, February 07, 2002 12:17 PM Subject: Re: [DXBase] Rotators and DXbase > Joe > I use a Ham IV via a Sartek interface and it works properly in DXBase. > It's probably one of the cheaper interface units. But there is a > catch. The Sartek has been out of stock for quite a while and requires > a ISA slot which most new computers do not have. > I think that's why it's OOS. > I talked to the supplier and he told me they were developing a USB interface > unit but I'm beginning to fear it may not come to market. > > ----- Original Message ----- > From: "Joseph A. Glockner" <[EMAIL PROTECTED]> > To: "DXbase Reflector" <[email protected]> > Sent: Wednesday, February 06, 2002 3:45 PM > Subject: [DXBase] Rotators and DXbase > > > > Good afternoon to all, > > > > I am thinking about getting a rotator and interfacing it with DXbase > > - and wanted to find out from all of you who use a rotator and > > interface it with DXbase - > > > > which brand of rotator are you using? > > > > if you interface it with DXbase, how has it worked out for you? > > > > > > 73 to all de Joe WA6AXE > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase _______________________________________________ DXBase Reflector - Please visit us on the web at www.dxbase.com - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: http://mailman.qth.net/mailman/listinfo/dxbase
