You can NOT key CW thru the rigblaster. You will have to have a keying circuit (in the help files) to key your CW KEY input on the back of the rig and set up for another serial port (the serial port MUST be a regular serial port, you can NOT us a serial port that is on a USB to SERIAL HUB) I already been there and tried it.
73 de Tony, KD4K My Weather Page http://home.adelphia.net/~tonycash/ My Ham Radio Page http://home.adelphia.net/~tonycash/kd4k/radio.html Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page http://home.adelphia.net/~tonycash/sawnee/index.html ----- Original Message ----- From: "Raymond W Brann" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, October 01, 2002 4:15 PM Subject: [DXBase] DX-Base 03, CW Keying > Hi, I thought it'd be interesting to set up DX Base to do CW keying. > Spent several hrs this afternoon trying different settings and cannot > get > DX Base to key my rig, It reads freq's and logs into the logbook just > fine. > Rotor controls fine. > > My setup: > Computer PII-400 > Rig: IC-746 > > Rotor: Com1 > Rig: Com3 > RigBlaster: Com6 > > I've checked activate internal DX keyer and set port to 6. > > Any suggestions greatly appreciated > 73 > Ray / W1RWB > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
