Peter, This is Joe WA6AXE .. since I was the person who made up that label file that you are speaking of - and since that label file is really not good for this scenario -- I will "separately" email you a 8161 Swl QSL label file that will be OK for you to use ...
I am sending this email to both yourself and the reflector. But, can not attach anything (reflector) - so another email will be coming to you only at this time .. If anyone else wants the SAME SWL label file - just pse send me an email.. 73 Joe WA6AXE Peter Dougherty wrote: > Hi, > > I'm trying to use the 8161 SWL label template to print SWL labels. When > I run the batch it prints the SWL station's call in the SWL callsign box > as it's supposed to, but it also puts the SWL's callsign in the field > for the station he overheard me working. > > What I do to get it to that point is invoke the previous QSO dialog, > enter the callsign of the station the SWL heard me working, select the > appropriate one(s) and press the SWL REPLY button, with mode set to Card > (not LoTW). It asks me the SWL's call and RST after each one. When I > then go to run the label job, I select label group S and select > 8161SWL.lbl. It again asks me the SWLs callsign and the Buro or address > for each label. I run the job and it will say something like > > To SWL SP1234-56 via SP Buro > this confirms your reception report of: > W2IRT in conversation with SP1234-56 > (then the date/mode/time/etc) > > When I open the label file in the editor the CALL field is in the > correct place. > > After fidgeting with it for a few minutes it appears that it inserts > into the CALL field whatever value I enter in the dialog box that pops > up after hitting the SWL reply button (i.e. the first time it asks for > the SWL call sign). This is obviously in error. > > What can I do to get this working as it should? > > > > > 73 de Peter (W2IRT) > [EMAIL PROTECTED] > > Please visit http://www.nyctrackbook.com for details of my book > Tracks of the NYC Subway > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
