Thanks all. Again its that guy who keeps doing the wrong things and come to the wrong conclusions. ME.
Jim From [EMAIL PROTECTED] Wed Nov 24 11:20:49 2004 From: [EMAIL PROTECTED] (Ron Stordahl) Date: Wed Nov 24 11:27:11 2004 Subject: [Dxbase] Dxbase and Icom 756PROIII In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Raymond Phillips wrote: >Hi All > Has anyone managed to get the PROIII working >with dxbase? > If so help required > >Rgds Raymond GM0VRP > > >Rgds Ray >GM0VRP > > >===== >Rgds Ray >GM0VRP > > > > Ray Apparently you have one? I have been looking for the documentation on the computer interface to see if several problems with the Pro II have been corrected. If you are aware where I might download the computer interface description I can compare it to the Pro II and see what changes have been made. If there are some it may require changes to the Radios.INI file, perhaps I could make them. So the first step will be to get a copy of the interface spec's. Ron, N5IN From [EMAIL PROTECTED] Wed Nov 24 14:11:25 2004 From: [EMAIL PROTECTED] (Al Bailey) Date: Wed Nov 24 14:18:25 2004 Subject: [Dxbase] Mapping Message-ID: <[EMAIL PROTECTED]> FWIW there is a dxpedition going on right now to FIJI and the last call on the list is mapped by default to 3D2X which is wrong. You may want to go into your database and map 3D2XA to 3D2 so you will get the correct spots. I went in and did them all even though it is most likely not necessary but what the hay. Best wishes for Thanksgiving and 73 de K8SIX Incidentally they all go via WA4WTG.... 3D2EE = Mark, AG9A 3D2KW = Kenny K2KW 3D2OK = Mike, WA6O 3D2SS = George, W2VJN 3D2TS = Tom, N6BT 3D2XA = Fred, KE7X
