Here is a wish. Have a option where when the spot comes in it does a instant
query to the online AR database on the cluster, gets the info and puts it
into the QSL info window. Or also do a self query for the same.
Sean
From [EMAIL PROTECTED] Sun Feb 20 23:39:19 2005
From: [EMAIL PROTECTED] (Charlie)
Date: Sun Feb 20 23:51:25 2005
Subject: [Dxbase] DXbase/K2
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
What cpu, ram, os etc are you using?
Charlie
Ham Radio - AD5TH
www.ad5th.com
Live Blues Music
www.492acousticblues.com
----- Original Message -----
From: "Tony Morgan" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, February 20, 2005 7:47 PM
Subject: Re: [Dxbase] DXbase/K2
> Unchecked "activate cdrom interface and auto screen lookup" in options
> menu and that fixed it.
> Callbook is on hard drive though and don't remember that being a problem.
> Guess it's just going to depend on how big of a hurry I'm in.
> Tnx for all the replies.
>
> Tony W7GO
> ----- Original Message -----
> From: "Bob Main" <[EMAIL PROTECTED]>
> To: "Tony Morgan" <[EMAIL PROTECTED]>
> Sent: Sunday, February 20, 2005 5:19 PM
> Subject: Re: [Dxbase] DXbase/K2
>
>
>> Tony, I just finally got my Kenwood wired and working with DXB today and
>> it also takes about 4-5 seconds before it responds. My Yaesu Mark V is
>> almost immediate, 1-2 sec.
>>
>> Bob
>> KB4CL
>>
>> ----- Original Message -----
>> From: "Tony Morgan" <[EMAIL PROTECTED]>
>> To: <[email protected]>
>> Sent: Sunday, February 20, 2005 7:35 PM
>> Subject: Re: [Dxbase] DXbase/K2
>>
>>
>>> Ok,
>>> Nothing else running except DXbase 2005.
>>> Logging from spot 4-5 seconds.
>>> Radio off, entering manually same - slow.
>>> I know program will log almost instaneously but I'm
>>> stuck on trying to figure it out.
>>> If the other programs ran slowly I'd think it was a computer problem
>>> (maybe it still is)
>>> Using DX4win or HRD logging and freq control almost instantaneous, but
>>> I' a DXbase kind of guy.
>>> K2 setup is 4800,8,N,2
>>> Any other help is appreciated.
>>>
>>> Tony W7GO
>>> [EMAIL PROTECTED]
>>>
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "FireBrick" <[EMAIL PROTECTED]>
>>> To: "Tony Morgan" <[EMAIL PROTECTED]>; <[email protected]>
>>> Sent: Sunday, February 20, 2005 10:52 AM
>>> Subject: Re: [Dxbase] DXbase/K2
>>>
>>>
>>>> The obvious question is:
>>>> "Is anything else running on your computer?"
>>>>
>>>> And try this.
>>>> turn off rig control.
>>>> Now try to log a station from the Internet Cluster or DX Info windows.
>>>>
>>>> That will give you a clue.
>>>> I find that the logging of a spot without rig control is almost
>>>> instantaneous but there can be a lag if I have to 'jump' to a Frequency
>>>> and change mode on my Yaesu FT1000MP.
>>>>
>>>> You can do a crtl, alt, delete, switch to PROCESSES, and watch what is
>>>> grabbing cpu cycles.
>>>>
>>>> and curious if you use something like Writelog, does the jump seems
>>>> slow also?
>>>> one item that is a long shot...what stop bit setting does the K2
>>>> interface require.
>>>> I think I read the K2 emulates a Kenwood???
>>>> Hope this gives you some clues.
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Tony Morgan" <[EMAIL PROTECTED]>
>>>> To: <[email protected]>
>>>> Sent: Sunday, February 20, 2005 12:35 PM
>>>> Subject: [Dxbase] DXbase/K2
>>>>
>>>>
>>>>> Hi guys,
>>>>> I'm using DXbase 2005 with a K2/100 computer control.
>>>>> Using a fast pentium with lots of memory and XP pro.
>>>>> Changing frequencies from internet cluster seems very slow (4-5
>>>>> seconds)
>>>>> Logging a spot is also kinda slow.
>>>>> I am using the K2 in radio.ini.
>>>>> Everything is just very sluggish.
>>>>> Everything is set correctly in user options and the com port itself.
>>>>> Have tried other com ports with the same results.
>>>>> Also tried closing packet window, still slow.
>>>>> Have tried a couple other programs and everything runs very fast on
>>>>> them.
>>>>> Can anyone offer other things for me to check?
>>>>>
>>>>> Thanks
>>>>>
>>>>> Tony W7GO
>>>>> [EMAIL PROTECTED]
>>>>> ______________________________________________________________
>>>>> Dxbase mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:[email protected]
>>>>>
>>>>
>>>>
>>>
>>> ______________________________________________________________
>>> Dxbase mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[email protected]
>>>
>>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
