I think I understand what your trying to do. First off, you must have a reg file from Jack that contains ALL THE CALLSIGNS you will be handling data for. So If you have a separate log or .mdb file for AL9A, and a separate log or .mdb file for KC9UM. Both those calls must be in the reg file.
Let's assume you do have the calls in your reg file and have ran it. When DXB6 installed it created a AL9A.mdb file that was empty (except for a free qso with some K4 station that must be deleted prior to importing your real qso's) You imported your old DXB3 to this new .mdb file. But now you want to create a new .mdb file called KC9UM. So go to Safety folder, copy the default.mdb file to a safe place, rename it to KC9UM.mdb and then recopy/paste it back into the DXB6 directory. Now do you DXBImport. That should work. That is if I understood your problem correctly. ----- Original Message ----- From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> To: "DXbase Reflector" <[email protected]> Sent: Friday, May 13, 2005 12:29 PM Subject: [Dxbase] DXbase import to 2006 >I just upgraded to DXB2006 from DXB2003. The import of my current AL9A.mdb > file went without a hitch. I am now trying to import my old callsign > database, KC9UM.mdb, but am getting an error message from the DXB import > utility. I point the source path name to the old 2003 mdb file and change > the target mdb path to the 2006 folder with the file name KC9UM.mdb. When I > click on OK the following error message box, titled Ugdxbase, says "Can't > find file in DXbase 2006". Apparently it is trying to find the KC9UM.mdb > data base which has not yet been imported? Should I just copy the data base > to the 2006 folder and then do the import?Any suggestions? > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
