At 08:51 AM 5/17/2005 -0500, Richard Detweiler wrote:
>Hello,
>
>It's time to submit DXCC, Have LOTW and cards, Will have the
>cards checked at Dayton.
>
>Have 73 countries based on info in LOTW Yet DXBase 2006 shows only 71,
>have 109 total,
>
>Does someone have a step by step guide for submitting?
>
>I am thinking to check and submit LOTW first, Then somehow mark those in
>DXBase2006 for the award submission. Then add in the cards...
>
>Should this be one application, or two, (one for card and one for LOTW).
I tried a "combined" application a year or so ago. I would not do it
again. If I were you, I would take my cards to Dayton and get them
checked. When they get approved at Newington you will get back a printout
of *all* of your credits and the LoTW site will reflect this. Bring your
log up to date.
Then you can request LoTW credit for the new ones. I can't comment on the
cost differential in doing this (I'm sure it's more $$) but the lower grief
level is worth the money in my mind.
From [EMAIL PROTECTED] Tue May 17 11:15:56 2005
From: [EMAIL PROTECTED] (Phil Paulhus)
Date: Tue May 17 11:25:04 2005
Subject: [Dxbase] Logging Digital Sats
Message-ID: <[EMAIL PROTECTED]>
Hi,
I have started to log some satellite contacts. When creating a ADIF file to
submitt to LOTW the following error message is displayed:
Signing using CALL=K1ICO, DXCC=291
Error: Invalid MODE (DIGITAL) on line 24
CALL: KA1OLE
QSO_DATE: 20050327
TIME_ON: 155400
FREQ: 0.14580
BAND: 2M
SAT_NAME: ISS
PROP_MODE: SAT
MODE: DIGITAL
In this case SAT = ISS, Mode = Digital, Submode = blank.
Error: Invalid MODE (APRS) on line 30
CALL: KB9LTH
QSO_DATE: 20050516
TIME_ON: 003221
FREQ: 0.14580
BAND: 2M
SAT_NAME: ISS
PROP_MODE: SAT
MODE: APRS
In this case Sat = ISS, Mode = Digital, Submode = APRS.
What are the proper entries for these fields?
73 Phil k1ico
From [EMAIL PROTECTED] Tue May 17 17:27:44 2005
From: [EMAIL PROTECTED] (Joseph Glockner)
Date: Tue May 17 17:37:03 2005
Subject: [Dxbase] Logging Digital Sats
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Phil,
For the acceptable TQSL Modes in your ADI file -- open you
TQSL program and go to File / Create New ADIF file / ...
Now, go to the Mode "drop-down" window .. there, you will see
the acceptable TQSL modes ... "if" your MODE column of DXbase
doesn't show one of those "acceptable" TQSL Modes - then, you
will have to go into the following in your TQSL program:
File / Preferences / ADIF Modes TAB /
In that area is where you will tell the TQSL program how to
"Map" the existing MODES you have in DXbase Mode column to
an "acceptable" TQSL Mode ..
Such as:
LSB -> SSB
since LSB is not an acceptable mode for TQSL ... there is
an area in your TQSL program with a good HELP File ..
Hpe that this helps out.
73 Joe wa6axe
Phil Paulhus wrote:
> Hi,
>
> I have started to log some satellite contacts. When creating a ADIF file to
> submitt to LOTW the following error message is displayed:
>
> Signing using CALL=K1ICO, DXCC=291
> Error: Invalid MODE (DIGITAL) on line 24
> CALL: KA1OLE
> QSO_DATE: 20050327
> TIME_ON: 155400
> FREQ: 0.14580
> BAND: 2M
> SAT_NAME: ISS
> PROP_MODE: SAT
> MODE: DIGITAL
>
> In this case SAT = ISS, Mode = Digital, Submode = blank.
>
> Error: Invalid MODE (APRS) on line 30
> CALL: KB9LTH
> QSO_DATE: 20050516
> TIME_ON: 003221
> FREQ: 0.14580
> BAND: 2M
> SAT_NAME: ISS
> PROP_MODE: SAT
> MODE: APRS
>
> In this case Sat = ISS, Mode = Digital, Submode = APRS.
>
> What are the proper entries for these fields?
>
> 73 Phil k1ico
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
From [EMAIL PROTECTED] Wed May 18 10:50:47 2005
From: [EMAIL PROTECTED] (Richard Detweiler)
Date: Wed May 18 11:00:10 2005
Subject: [Dxbase] ModifiedDxccqso.rpt
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Where can I find the "ModifiedDxccqso.rpt" from Joe WA6AXE.
And do I need it for DXCC? I have several cards that have multiple entries,
Would like them to sort to the end as it should.
btw the reflector is bouncing all my messages today..
best wishes,
Rich
K5SF
